Hardware Engineer

As a Hardware Engineer at Bridge12, you will work on multidisciplinary projects that involve the development of control systems for microwave and terahertz generators, particle accelerators and other scientific instrumentation involving real-time and embedded software, firmware and hardware. The candidate shall have a solid knowledge of FPGA design and be capable of RTL design, simulation, physical implementation and verification of complex FPGA modules comprising a mix of custom RTL with hard and soft vendor IP cores within a larger architecture. The candidate should be experienced in circuit design, schematic capture and board bring up. The candidate shall be responsible for selecting components and determining hardware test specification based on required parameter, performance and cost criteria. The candidate will interface with cross functional teams for firmware design/development team and mechanical engineering team. This position requires creativity and alternative thinking to develop new ideas for efficient hardware implementation. There will be occasional travel associated with installation and testing at customer site.

Minimum Qualifications

  • 5+ years of experience in FPGA/VHDL design and development tools

  • Knowledge of RTL (VHDL, Verilog/System Verilog ) synthesis, simulation, implementation, and debug tools

  • Experience designing around FPGA based SoCs is desirable

  • Good understanding of hardware/software partitioning

  • Familiarity with FPGA design tools such as Xilinx Vivado tools in specific ZYNQ SoCs

  • Familiarity with Xilinx Tcl

  • Familiarity with Cadence or Mentor Graphics Schematic Capture and Layout tools

  • In depth understanding of digital design principals

  • In depth understanding of low-level hardware/software system debugging

  • Proven track record of designing and analyzing electronic and embedded solutions

  • Knowledge of basic signal processing concepts (MATLAB)

  • Knowledge of implementing signal processing algorithms

  • Experience with Logic Analyzers, Digital Oscilloscopes

  • Experience in completing at least one complete product design life cycle

  • Excellent verbal and written communication skills and good team work ethic

Optional Skills & Expertise

  • Familiarity with signal and power integrity analysis, board level simulation, knowledge of standard interfaces such as PCI Express, Ethernet at the electrical and protocol level

  • Proficiency writing scripts using Python, MATLAB and other modern scripting tools

  • Knowledge of C/C++ language in embedded environments helpful

Qualification

B.S or M.S. in Electrical Engineering

Bridge12 is an Equal Opportunity employer. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Please email Resume or CV with a cover letter to: careers@bridge12.com

Reference Number: S081805

 

Have a question?

If you have questions about our instrumentation or how we can help you, please contact us.